March 2023 Founder Update
The last quarter of 2022 saw a major audit of our technical program. The current state of the program and the tasks remaining to be completed were assessed and the result was a significantly revamped project plan for the TA200TP.
IN THE MEDIA: TurbAero's Berni Breen interview with AvWeb at SUN 'n FUN 2023
Berni Breen from TurbAero chatted with AvWeb's Paul Bertorelli during SUN 'n FUN 2023.
Design and Technical Update March 2023
We have received delivery of the major static and rotating components for the gearbox. While it is exciting to see components arrive, it will be more exciting to see those components going together to become the actual gearbox.
RV-7A to become an RV-14
We have reassessed the suitability of the RV-7A as the aircraft for our conversion project and have decided to proceed with our previous preferred option of an RV-14 as our test bed and ultimate demonstrator for our engine in the US.
Build an RV7T with me - YouTube series - watch episode 2
Episode 2 of 'Build an RV7T with me'. Its all about making sure the foundation is right before we move forward with the rest of the build.
IN THE MEDIA: Future Flight
TurbAero featured in Future Flight magazine launch issue, August 2022.
Build an RV7T with me - YouTube series - episode 1 is live now!
Watch episode 1 live now on YouTube!
In the Media - Kitplanes Magazine
TurbAero featured in KitPlanes Magazine coverage of AirVenture 2022.
July 2022 Founder Update
The last quarter has seen good progress being made. It has been highly motivating to finally see components being built. Preparations are also underway for EAA AirVenture with an exciting new booth display planned.
Design and Technical Update July 2022
We have made significant advances in the technical program however, several components have been redesigned which has delayed prototyping. While these delays are frustrating, they will ultimately result a more reliable engine for our customers.
Design and Technical Update February 2022
Several components are now undergoing prototyping. We anticipate manufacturing or sourcing the remaining components during the next quarter.